MICRO SEVEN, INC.â
CALLER-ID TEST UNIT,
model LS200-8G-A (new)
Caller-ID Test Unit,
model LS200-8G-A is redesigned to contain a complete 8-line telephone line and
caller-ID simulator that produces programmable caller-ID signals under various
central station and transmission line conditions in lower cost.
Caller-ID Test Unit, model LS200-8G-A
(new)
Features
- 8-line telephone-line simulator with multi-line DTMF dialer
option, 20Hz ring signal option (manually potentiometer-type adjustable),
all-line dual frequency call progress tone option, programmable caller-ID
option, audio monitor option, and serial interface option. It includes standard
programmable telephone number, single/dual frequency call progress tone
selection, pseudo line impairment with random noise and extra 20dB attenuation,
PBX mode, programmable disconnect signal, programmable network delay.
-
On-hook and off-hook (with call-waiting-optional) caller-ID in both single and
multiple message formats.
-
Distinctive ringing features.
-
RS232C-programming of caller-ID FSK frequency components and amplitudes.
-
RS232C-programming of random noise amplitude level that is mixed into Caller-ID
Signals.
-
RS232C-programming of telephone numbers, and complete caller-ID parameters
including names, privacy status, out-of-area status, visual waiting message,
and call-waiting signals.
- RS232C-programming
of call-waiting signals (SAS and CAS) for their frequencies and amplitudes.
- Programmable
caller-ID data for multiple message format type
- DTMF
type caller-ID may be included as an option.
Benefits
-
Design verification of caller-ID receivers under the worst telephone line
conditions.
-
Quality and quantity test of caller-ID receivers under various signal levels,
noise levels, frequency components, and frequency attenuation
-
Format compatibility checks without using actual telephone lines.
- Ring
signal compatibility checks for international application.
-
Testing Bellcore and ETS caller-ID receivers
Application
-
Testing of caller-ID receivers with or without call-waiting for engineering and
manufacturing.
- Demonstration of caller-ID receivers with or
without RS232C interface to PC.
Specifications:
RS232
interface and control software for programming is included.
Programmable
Caller-ID Option:
FSK caller-ID data delivery with associated with ring signal for single message
format (type 1), multiple message format (type 2), caller-ID on call-waiting (option),
and programmable message format which allows delivery of customer programmable
data in multiple message format. All programmed data remain in nonvolatile memory.
It is
available with both Bellcore for USA and Canada and ETS (European standard).
Frequency and amplitude
programming by using our provided control software for the following signals
for both Bellcore and ETS standards:
Mark, space, CAS (2130Hz and 2750
Hz)
Random
noise may be included in the caller-ID signals.
Options available:
220V
power input option
DTMF
caller-ID delivery option
Caller-ID
on call-waiting option
Please find technical specifications of LS200-8A in http://www.microseveninc.com/ls100200b.htm.
Made
in U.S.A.
Micro Seven, Inc.,
1095-K N.E. 25th Hillsboro, OR 97124 U.S.A.
Phone: 503-693-6982, Fax:
503-693-9742