MICRO SEVEN model BT10, Alarm Panel to Wireless Interface, transmits Contact-ID alarm message to telephone dialer BT15 wirelessly

Copyright 2017 Micro Seven, Inc.

 


 


The front panel view of model BT10 is shown in the above picture.

BT15 TELEPHONE DIALER

 

BT10

ALARM PANEL TO WIRELESS

 

ANY CONTACT-ID ALARM PANEL THAT WAS ALAREADY INSTALLED OR NEW INSTALLATION

 
                                                                                                                                                    WIRELESS                      

 

 

 

 

 

 

 

 

 

 

 


Figure 1. Automatic alarm message transmission from alarm panels in Contact-ID protocol

 

Features:

-Provides a simulated telephone line to interface to an alarm panel for receiving alarm signals
-No wire installation required between alarm loops or sensors and alarm panel to telephone dialer
-Wireless operation
-contact-ID
-efficient communication to BT15 dialer
-multiple BT10s may be shared single telephone dialer

INTRODUCTION

Model BT10 is a sub component interfacing alarm panel to a distance telephone dialer via wireless. It mainly provides simulated telephone line features that include dial tone, loop current and handshake signal to connected Contact-ID compatible alarm panel for receiving alarm signals from the alarm panel and transmitting received alarm signals to BT15 Telephone Dialer wirelessly. Because time for BT10 to transmit alarm signal and telephone number only takes few seconds, several BT10s can share one BT15 via wireless. The dialing telephone number that a matching BT15 dialing and server BT15 MAC address are factory and also field programmable. Multiple messages from an alarm panel are received by BT10 are transmitted to BT15 in single wireless connection.

SPECIFICATIONS:

Wireless standard: IEEE 802.15.1 transparent UART operation, BLE operation

MAC address: 6-byte unique

Wireless configuration: client service

Server MAC address of BT15:
pre-programmed at our factory. It is also field programmable.

Wireless distance: less than 90 yard

Analog signals:  dial tone and handshake signal and kiss-off tones for Contact-ID

Multiple Contact-ID messages transmission

Protocol: Contact-ID

Loop current and loop voltage

Programming of MAC address for a matching BT15 dialer is factory-configured and also field programmable.

Programming of telephone number that BT15 dials is factory-programmable and also field programmable.

Front panel controls:

Power indicator
Wireless connection status

Rear panel controls:

DC power input, DC12V, 200 mA

AC/DC Adapter 117VAC +/- 5%, or 220VAC +/- 5%(for 220V unit optional)

Dimensions: 19 cm (4") W x 4.5 cm (1.75") H x 10 cm (7.5") L

Weight: 750g (1.65 LBS)

Environmental: Operating temperature with power on: 0 to 35 degree C, Humidity: 85% RH at 35 degree C, storage temperature and operating temperature without power on

Warranty Service: six months limited warranty. No warranty if any factory seal is broken.

Service is performed at the factory, usually within 5 working days.

Matched wireless components requried: BT15, telephone dialer

Options and Accessories:

Accessories include AC/DC power adapter for 117VAC input power.

International AC/DC power adapter option                                                                              

Micro Seven, Inc.

1095-K N.E. 25th

Hillsboro, OR

97124 U.S.A.

phone: 503-693-6982, fax: 503-693-9742

Sales@microseveninc.com

www.microseveninc.com