MICRO
SEVEN MODEL RP2, Stand-alone Remote Telephone Dialer with internal built-in
battery inputs telephone line usages and transmitting data to its own telephone
receivers. Data is either dialed telephone numbers, transmitted Contact-ID
alarm messages, or telephone connect time and number of calls made.
COPYRIGHTS MICRO SEVEN, INC. 2018
Features:
-long term (one
year) battery operation
-easy to replace a
battery
-almost no load to
telephone lines
-DTMF and Rotary
Pulse dialing methods
-small plastic case and
mounting base plate
-model RP2 is for
record and report telephone line usage and total connect time, model RP2-1 is
for dialed telephone numbers, or model RP2-2 for reporting Contact-ID alarm
signal transmitted.
-12:00am reporting
time is default.
-Micro Seven model
CT10 with operating RP2 software
INTRODUCTION
Micro Seven
Model RP2, Stand-alone Remote Telephone Dialer, may be located at any telephone
line for inputting telephone line usages and transmitted data. Then once a day
at your specified time, Model RP2 dials a telephone number and transmits the
summarized data to a dedicated telephone server. RP2-1 is to record all dialed
telephone numbers, RP2-2 is to transmit all Contact-ID messages that are sent
by alarm panels to central stations, or RP2 is to record number of calls made
and total time of calls.
Programming of telephone
numbers and other parameters are provided at our factory at the time of your
order.
Front panel control:
Telephone
jack, RJ11 connector
Micro Seven, Inc. ®
1095-K
N.E. 25th Ave.
Hillsboro, OR
97124 U.S.A.
phone: 503-693-6982, fax: 503-693-9742
Sales@microseveninc.com
www.microseveninc.com